Carrier-access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Manuale Utente

Adit 3000 Series andMulti-Service Router (MSR) CardGUI REFERENCE MANUALPart Number: 770-0169 BBProduct Release: Adit 3000 Series - 1.6MSR Card - 2.0

1-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementOverview of Supported ProductsOverview of Supported ProductsThe following produ

2-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedUpgrade From a Local ComputerUpgrade From a Local ComputerThis feature allows the user to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-65 AdvancedUsersUsersUse this feature to view, add, edit, and delete users on the device, and to co

2-66 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedUsersAdding a User1. Select Advanced/ Users.2. Select New User and enter the following Gen

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-67 AdvancedUsersEditing a User1. Select Advanced/ Users.2. Select the Action/Edit icon of an existi

2-68 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedUsersConfiguring E-mail Notification for UsersThe e-mail notification feature allows users

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-69 AdvancedVLAN ConfigurationVLAN ConfigurationThe Virtual Local Area Network (VLAN) feature provid

2-70 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedVLAN ConfigurationConfiguring a VLAN1. Select Advanced/ VLAN Configuration. 2. Select Enab

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-71 AdvancedVLAN Configuration4. Enter a VID (VLAN ID number) for the VLAN. Range is 2-4094.5. Set

2-72 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedVLAN ConfigurationConfiguring the VLAN Port Setting1. Select Advanced/ VLAN Configuration.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-73 AdvancedVLAN Configuration3. Configure the port as needed.4. Select OK to save changes.Field Def

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-3 Web Based ManagementAccessing the GUIAccessing the GUINOTE: The following instructions assume th

2-74 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedVLAN Configuration

CHAPTER 3Network ConnectionsIn this Chapter Overview-Adit 3000 Connections- Adit MSR Connections Preconfigured Connections-Ethernet 1- Ethernet 2- S

3-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsOverviewOverviewThe Network Connection window allows the user to create and conf

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-3 Network ConnectionsOverviewAdit MSR ConnectionsThe MSR provides the following connections: LCC 1-

3-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsOverview

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-5 Network ConnectionsPreconfigured ConnectionsPreconfigured ConnectionsThe following connections tha

3-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsPreconfigured ConnectionsConfiguring Ethernet 1To change the configuration of Et

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-7 Network ConnectionsPreconfigured ConnectionsNOTE: For a manually specified network mode (Internet

3-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsPreconfigured ConnectionsConfiguring DHCP OptionsTo configure DHCP options:1. Fr

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-9 Network ConnectionsPreconfigured ConnectionsEthernet 2The Ethernet 2 Properties window displays th

1-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementOverviewOverviewThe GUI management window contains two sections: Navigation Pa

3-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsPreconfigured ConnectionsConfiguring Ethernet 2To change the configuration of E

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-11 Network ConnectionsPreconfigured ConnectionsNOTE: For a manually specified network mode (Interne

3-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsPreconfigured ConnectionsSerial 1 (Adit 3000 Only) The Serial 1 (PPPoDS0) Prope

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-13 Network ConnectionsPreconfigured ConnectionsT1 1 - T1 4 (Adit 3000 Only)There can be up to four p

3-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsPreconfigured ConnectionsConfiguring a T1 (1-4)The Configure T1 n (1-4) window

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-15 Network ConnectionsPreconfigured ConnectionsLog ButtonSee, System Monitoring/T1 Log (Adit 3000 On

3-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require ConfigurationConnections that Require ConfigurationThe

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-17 Network ConnectionsConnections that Require ConfigurationMultilink The Multilink Properties windo

3-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require Configuration

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-19 Network ConnectionsConnections that Require ConfigurationThe following are field definitions for

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-5 Web Based ManagementOverviewNavigation Pane IconsThe following icons are available on the Navigat

3-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require ConfigurationNOTE: The Adit uses the compressed forma

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-21 Network ConnectionsConnections that Require ConfigurationSerial (PPPoDS0)The Serial Properties wi

3-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require Configuration

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-23 Network ConnectionsConnections that Require ConfigurationThe following are field definitions for

3-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require ConfigurationDNS Static Entries (This name is a link t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-25 Network ConnectionsConnections that Require ConfigurationUnderlying Device - High Speed Serial Co

3-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsConnections that Require Configuration Field DefinitionAssignment Data - Sets t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-27 Network ConnectionsNew ConnectionNew ConnectionThere are a variety of options for creating a New

3-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew ConnectionNew Connection Window

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-29 Network ConnectionsNew ConnectionPoint-to-Point Protocol over DS0 (Serial)PPPoDS0 (Serial) create

1-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementHomeHomeThe Home window displays the Network Map which shows the various elemen

3-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew Connection5. Select Next >.6. The Connection Summary window displays the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-31 Network ConnectionsNew Connection7. The new Serial connection appears on the Network Connections

3-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew ConnectionMultilink Point-to-Point Protocol over DS0 (Multilink)Multilink c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-33 Network ConnectionsNew Connection5. Select Next >.6. The Connection Summary window displays th

3-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew ConnectionPoint-to-Point Tunneling Protocol (PPTP)Point-to-Point Tunneling

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-35 Network ConnectionsNew ConnectionPoint-to-Point Tunneling Protocol Server (PPTP Server)PPTP Serve

3-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew Connection6. Select Next >.7. Select 3Finish.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-37 Network ConnectionsNew ConnectionLayer Two Tunneling Protocol (L2TP)L2TP enables secure transfer

3-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsNew ConnectionInternet Protocol Security (IPSec)IPSec enables secure transfer o

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-39 Network ConnectionsNew Connection4. Select the Remote Address and Subnet types, and select Next &

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-7 Web Based ManagementHomeNetwork MapThe following icons appear on the Network Map. For all icons

3-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsOSPF Configuration on the Network ConnectionOSPF Configuration on the Network C

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-41 Network ConnectionsOSPF Configuration on the Network Connection3. At the Configure Ethernet 1 win

3-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsOSPF Configuration on the Network Connection4. Set the OSPF interface paramet

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-43 Network ConnectionsOSPF Configuration on the Network ConnectionInterface Cost Defines the cost of

3-44 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUINetwork ConnectionsOSPF Configuration on the Network Connection

CHAPTER 4SecurityIn this Chapter Overview General Access Control Local Servers DMZ Host Port Triggering Remote Administration IP/Hostname Filt

4-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityOverviewOverviewThe Adit 3000 and MSR include comprehensive and robust security services:

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-3 SecurityOverviewThe following sections describe each of the tabs available at the Security window

4-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityGeneralGeneralUse the General tab to configure the Adit’s basic security settings. The fire

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-5 SecurityGeneralThe important thing to note is that it is the origin of the request, not subsequen

1-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementHomeHost Information Window To display this window, click on the Computer Host

4-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAccess ControlAccess ControlUse the Access Control tab to define a rule to block specific n

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-7 SecurityAccess ControlAdding an Access Control RuleTo add an access control rule:1. Select New En

4-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAccess Control4. Select the service(s) to block.Note: The Service table is used by multiple

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-9 SecurityAccess ControlModifying an Access Control Rule Rules can be enabled/disabled by checking

4-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAccess ControlCreating a User-Defined Rule1. At the Add Access Control Rule window, select

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-11 SecurityAccess Control4. Configure the Service port protocol:Field DefinitionProtocol TCP - Tran

4-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAccess Control5. Select OK to save. The newly created service port is listed in the table.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-13 SecurityLocal ServersLocal ServersBy default, the Adit blocks all external users from connecting

4-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityLocal ServersAdditionally, Local Servers enable you to redirect traffic to a port differen

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-15 SecurityLocal Servers2. Enter the local IP address of the computer that will provide the service

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-9 Web Based ManagementHomeTest ConnectivityThe Test Connectivity button brings up the Diagnostics w

4-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityLocal ServersModifying a Local Server A Local Server can be enabled/disabled by simply ch

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-17 SecurityDMZ HostDMZ HostThe DMZ (Demilitarized Zone) Host feature allows one local computer to b

4-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityDMZ HostDesignating a Local Computer as a DMZ HostTo designate a local computer as a DMZ h

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-19 SecurityPort TriggeringPort TriggeringPort triggering can be used for dynamic port forwarding. B

4-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityPort TriggeringSetting up Port TriggeringTo set up port triggering:1. Select New Entry on

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-21 SecurityPort Triggering3. If creating a New User-Defined Service:a. Enter a Service Name and Ser

4-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityPort Triggeringd. Select OK. The new triggering service is listed in the table. e. Select

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-23 SecurityRemote AdministrationRemote AdministrationIt is possible to access and control the Adit

4-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityRemote AdministrationConfiguring Remote AdministrationTo configure remote access to Adit a

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-25 SecurityIP/Hostname FilteringIP/Hostname FilteringYou can configure the Adit to block specific I

1-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementQuick SetupQuick SetupThe Quick Setup window enables quick configuration of yo

4-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityIP/Hostname FilteringAdding an Address/Hostname to the Restricted ListTo add a restricted

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-27 SecurityIP/Hostname Filtering5. Select OK to add the Address to the Restricted list.6. If the si

4-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAdvanced FilteringAdvanced FilteringAdvanced filtering is designed to allow comprehensive

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-29 SecurityAdvanced FilteringAdding an Advanced Filtering RuleTo add a new advanced filtering rule:

4-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAdvanced Filtering4. On the Add Advanced Filter window, define the filter (see field defin

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-31 SecurityAdvanced FilteringField DefinitionMatching - Use this section to define the rule’s condi

4-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityAdvanced Filtering5. Select OK to save and enable the rule. The rule is listed in the Con

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-33 SecurityNAT BypassNAT BypassThe Security/NAT Bypass feature allows network address translation t

4-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecuritySecurity LogSecurity LogThe Security Log displays a list of firewall-related events, inclu

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-35 SecuritySecurity LogChanging the Security Log SettingsTo change the settings for the Security Lo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-11 Web Based ManagementQuick SetupInternet ConnectionConnection TypeThe WAN connection can be confi

4-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecuritySecurity LogSecurity Log SettingsField DefinitionAccepted EventsAccepted Incoming Connecti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-37 SecurityFirewall ImplementationFirewall ImplementationThe Adit provides very powerful NAT and fi

4-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityFirewall ImplementationRouting ModeThe routing mode determines whether NAPT (Network Addre

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 4-39 SecurityFirewall ImplementationFirewall Processing SequenceThis section details the sequence of

4-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISecurityFirewall ImplementationOutbound Firewall ProcessingThe following table describes the seque

CHAPTER 5System Monitoring In this Chapter Overview Connections Traffic System Log T1 Log (Adit 3000 Only) SIP Log PRI Log T1 Performance (Adi

5-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringOverviewOverviewThe System Monitoring window displays information that can be used

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-3 System MonitoringOverviewAdit MSR

5-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringConnectionsConnectionsThe Connections tab displays all the connections, their stat

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-5 System MonitoringTrafficTrafficThe Adit is constantly monitoring traffic within the local network

Copyright 2008 Turin Networks Inc. All rights reserved.The information presented in this manual is subject to change without notice and does not repre

1-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementQuick SetupManual IP Address Ethernet ConnectionThis window is used to manuall

5-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringSystem LogSystem LogThe System Log displays a list of the most recent activity tha

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-7 System MonitoringT1 Log (Adit 3000 Only)T1 Log (Adit 3000 Only)The T1 Log displays all T1 related

5-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringSIP LogSIP LogThe SIP Log displays all SIP related alarms and events.Field Definit

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-9 System MonitoringPRI LogPRI LogThe PRI Log displays all PRI related alarms and events.Field Defin

5-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringT1 Performance (Adit 3000 Only)T1 Performance (Adit 3000 Only)The T1 1 through T1

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-11 System MonitoringAlarmsAlarmsThe Alarms tab displays the system alarms, their severity, and the

5-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUISystem MonitoringSystemSystemThe System tab displays the amount of time that has passed since the

CHAPTER 6Voice Over IPNOTE: This feature is not available on the Adit 3200. In this Chapter Overview IP Telephony Phone Settings Phone Book Lin

6-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPOverviewOverviewThe VoIP feature allows you to connect multiple phones over a single b

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-3 Voice over IPIP TelephonyIP TelephonyUse the IP Telephony tab to configure VoIP dialing parameter

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-13 Web Based ManagementQuick SetupAutomatic IP Address Ethernet ConnectionWith this selection, the

6-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPIP TelephonyField DefinitionDialing ParametersDialing Timeout Determines how long the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-5 Voice over IPIP TelephonyProxy ServersProxy Type This drop-down menu allows users to select the p

6-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPIP TelephonyConfiguring the Digit MapThe Digit Map is used to define phone-specific di

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-7 Voice over IPIP Telephony4. Select New Entry to create a new Digit Map pattern, or select the Edi

6-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPIP TelephonyDigit Map PatternA Digit Map Pattern consists of a sequence of one or more

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-9 Voice over IPIP TelephonyAdvanced (Button)The Advanced button at the bottom of the IP Telephony w

6-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPIP TelephonyField DefinitionSIP InteropCalling Feature Mode Determines where the inte

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-11 Voice over IPIP TelephonyFXS Signaling Calling Party Disconnect (CPD) DurationAllows the user to

6-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPIP TelephonyRedundancy (Button)The Redundancy button at the bottom of the IP Telephon

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-13 Voice over IPIP TelephonyWhen the primary proxy is not reachable or returns an error, the system

1-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementQuick SetupPoint-to-Point Protocol over DS0 (Serial)With this selection, the M

6-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPPhone SettingsPhone SettingsUse the Phone Settings tab to configure each line for VoI

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-15 Voice over IPPhone SettingsAdit MSRNOTE: To display all available lines on the MSR, select Disp

6-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPPhone SettingsConfiguring Phone Settings1. Select the Phone Settings tab on the Voice

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-17 Voice over IPPhone SettingsField DefinitionIdentificationBegin Line Number Displays the line num

6-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPPhone SettingsSignalingProtocol Select the analog signaling mechanism:Loop Start - Se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-19 Voice over IPPhone BookPhone BookUse the Phone Book tab to define the Speed Dial settings. You c

6-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPPhone BookConfiguring Phone Book Settings1. Select Voice over IP/Phone Book tab.2. Se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-21 Voice over IPPhone BookField DefinitionPhone BookEnter the Speed Dial number. Range is 3-10 dig

6-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPLine MonitoringLine MonitoringThe Line Monitoring tab displays current information fo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-23 Voice over IPLine MonitoringAdit MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-15 Web Based ManagementQuick Setup

6-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPLine MonitoringThe following table defines the fields displayed in the Line Monitorin

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-25 Voice over IPTrunk SettingsTrunk SettingsNOTE: The Trunk Settings tab is only available on the

6-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk SettingsConfiguring Trunk SettingsTo configure the trunk:1. Select the Voice Ov

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-27 Voice over IPTrunk SettingsField DefinitionGeneralConnection Adit 3500:Connections are T1 #1 thr

6-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk SettingsIdentificationTrunk ID Display/edit the Trunk ID. A default ID is assig

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-29 Voice over IPTrunk SettingsDigit MapPer Trunk Digit Map Disabled - Use the phone book, maximum d

6-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk SettingsChannel ConfigurationThe Channel Configuration window displays the comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-31 Voice over IPTrunk SettingsField DefinitionAssignment in-out - Allows comminution in both direct

6-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk MonitoringTrunk MonitoringNOTE: The Trunk Monitoring tab is only available on

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-33 Voice over IPTrunk MonitoringAdit MSR

1-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementQuick SetupMultilink Point-to-Point Protocol over DS0 (Multilink)With this sel

6-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk MonitoringThe following table defines the fields displayed in the Trunk Monitor

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-35 Voice over IPTrunk RegistrationTrunk RegistrationNOTE: The Trunk Registration tab is only avail

6-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk RegistrationAdding a PBX Phone LineTo add a new PBX phone line:1. Select New En

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-37 Voice over IPTrunk Registration2. Enter the PBX line information. See the following table for f

6-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIVoice over IPTrunk Registration3. Select OK to enter the number and return to the Trunk Registrati

GLOSSARYAMI Automatic Mark InversionARP Address Resolution ProtocolB8ZS Bipolar with 8 Zero SubstitutionBIT Binary DigitBPS Bits Per SecondBPV Bipolar

Glossary-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossaryDLC Digital Loop CarrierDLCI Data Link Connection IdentifierDMZ Demilitarized ZoneDN

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-3 GlossaryMPPE Microsoft Point-to-Point Encryption MS-CHAP Microsoft CHAPMVEC Majority Vote

Glossary-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossaryUAS User Agent ServerVC Virtual ChannelVLAN Virtual Local Area NetworkVPN Virtual Pr

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-5 Glossary10Base-T The most widely installed Ethernet local area networks (LANs) use ordinar

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-17 Web Based ManagementQuick Setup

Glossary-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossaryCentral Office (CO) Where telephone companies terminate customer lines and locate sw

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-7 GlossaryElectro-magnetic Interference (EMI)Equipment used in high speed data systems, incl

Glossary-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossarygateway An entrance and exit into a communications networkGraphical User Interface (

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-9 GlossaryLocal Area Network (LAN)A short distance data communications network (typically wi

Glossary-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossaryMultilink PPP (MLPPP) MultiLink PPP. An extension to the point-to-point protocol th

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-11 GlossaryPHY PHY as in physical specifications. OSI Physical Layer, which provides for tra

Glossary-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossaryRouter Information Protocol (RIP)RIP is based on distance vector algorithms that me

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Glossary-13 Glossaryticks The distance between two networks, measured in time increments. Ticks may b

Glossary-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIGlossary

INDEXAAccess Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6Action icons . . . . . . . . . . . . . . . . . . . . . . . . .

1-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementQuick SetupPoint-to-Point Tunneling Protocol (PPTP)Point-to-Point Tunneling is

Index - 2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIIndexRedundancy button . . . . . . . . . . . . . . . . . . . . . . . . 6-12IP Telephony tab

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI Index - 3 IndexSScheduler Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52Securi

Index - 4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIIndexRemote Administration . . . . . . . . . . . . . . . . . . . . . 2-38Restart . . . . .

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-19 Web Based ManagementQuick SetupNo Internet ConnectionThis option disables the Internet connectio

1-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementNetwork ConnectionsNetwork ConnectionsMain WindowThe Network Connection window

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-21 Web Based ManagementNetwork ConnectionsAdit MSR

PREFACEPrefaceSafety InformationCAUTION! WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK

1-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementSecuritySecurityThe Adit 3000 and MSR include comprehensive and robust securit

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-23 Web Based ManagementVoice over IPVoice over IPThe VoIP feature allows you to connect multiple ph

1-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementVoice over IP

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-25 Web Based ManagementAdvancedAdvancedThis section of the Management Console is intended primarily

1-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementSystem MonitoringSystem MonitoringThe System Monitoring window displays import

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 1-27 Web Based ManagementSystem MonitoringAdit MSR

1-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIWeb Based ManagementLogoutLogoutThe Logout feature logs the user out of the system and returns to

CHAPTER 2AdvancedIn this Chapter Overview ARP Certificates Date and Time Diagnostics DNS Static Entries Dynamic DNS IP Address Distribution (D

2-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedOverviewOverviewThis section of the Management Console is intended primarily for more advan

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-3 AdvancedARPARPThe ARP (Address Resolution Protocol) window displays the current ARP table. There

iv Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIPrefaceNoticesThis manual contains important information and warnings that must be followed to ensur

2-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedCertificatesCertificatesPublic-key cryptography uses a pair of keys: Public Key, which enc

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-5 AdvancedCertificatesX.509 Certificate FormatThe Adit 3000 and Adit MSR support X.509 certificates

2-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedCertificatesObtaining and Loading an X.509 CertificateTo obtain an X509 certificate, you mu

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-7 AdvancedCertificates2. On the Adit 3000 or Adit MSR’s Local tab, select the Create Certificate Re

2-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedCertificates4. Copy and store the exact contents of the certificate to a file, and send it

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-9 AdvancedCertificates5. Select the Close button. The Certificates window appears, listing the cert

2-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedCertificates7. Paste the signed certificate.8. Select the Load button. The Certificates w

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-11 AdvancedCertificatesRegistering the CA’s CertificateAfter receiving the signed certificate from

2-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedCertificates2. Select Load Certificate, and paste the CA’s certificate into the window.3.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-13 AdvancedDate and TimeDate and TimeThis window allows the user to configure the date and time par

TABLE OF CONTENTSPrefaceSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedDate and TimeSetting the Date and Time1. Select Advanced/ Date and Time.2. Set the Time Zo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-15 AdvancedDate and TimeField DefinitionEnabled Check box to enable the Automatic Time Update.Proto

2-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedDiagnosticsDiagnosticsThe Diagnostics window allows the user to test network connectivity

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-17 AdvancedDiagnosticsPinging an IP Address1. Select Advanced/ Diagnostics.2. Enter the IP address

2-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedDNS Static EntriesDNS Static EntriesThe Domain Naming System (DNS) provides a service that

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-19 AdvancedDNS Static EntriesAdding a New Entry to the DNS Table1. Select Advanced/ DNS Static Entr

2-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedDNS Static EntriesModifying an Entry in the DNS Table1. Select Advanced/ DNS Static Entrie

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-21 AdvancedDynamic DNSDynamic DNSThe Dynamic DNS service allows you to alias a dynamic IP address t

2-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedDynamic DNSUsing Dynamic DNS1. Select Advanced/ Dynamic DNS.2. Specify the Dynamic DNS ope

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-23 AdvancedIP Address Distribution (DHCP)IP Address Distribution (DHCP)The Adit’s DHCP server makes

vi Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUITable of ContentsDNS Static Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedIP Address Distribution (DHCP)Editing DHCP Server SettingsTo edit the DHCP server setting

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-25 AdvancedIP Address Distribution (DHCP)Provide Host Name if Not Specified by ClientIf the DHCP cl

2-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedIP Address Distribution (DHCP)Defining a New Connection with a Fixed IP Address1. Select A

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-27 AdvancedIP Address Distribution (DHCP)3. Select New Static Connection.4. Enter the host informat

2-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedIPSec (IP Security)IPSec (IP Security)IPSec (IP security) is a standard for securing IP co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-29 AdvancedIPSec (IP Security)General IPSec SettingsField DefinitionBlock Unauthorized IP When an I

2-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedIPSec (IP Security)Key Management1. Select Advanced/ IPSec.2. Select the Settings button.3

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-31 AdvancedIPSec (IP Security)Log SettingsUse the IPSec Log Settings window to specify the type of

2-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedIPSec (IP Security)Creating a New Secured Connection1. Select New Connection on the Intern

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-33 AdvancedNAT/FW ConnectionsNAT/FW ConnectionsThe NAT Firewall Connections table displays all acti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI vii Table of Contents3 Network ConnectionsOverview . . . . . . . . . . . . . . . . . . . . . . . . .

2-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedNetwork ObjectsNetwork ObjectsThe Network Objects window will create a Network Object, whi

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-35 AdvancedNetwork Objects5. Set the following fields: 6. Click OK. The newly created Network Ob

2-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedPPTP (Point-to-Point Tunneling Protocol)PPTP (Point-to-Point Tunneling Protocol)The Adit c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-37 AdvancedRADIUS ClientRADIUS ClientFor authentication to function, the client’s transmission must

2-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRemote AdministrationRemote AdministrationIn it’s default state, the Adit locks all extern

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-39 AdvancedRestartRestartThis option allows the user to reboot the Adit 3000 or MSR card. Restartin

2-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRestore DefaultsRestore DefaultsThe Restore Defaults option sets the Adit back to its fact

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-41 AdvancedRoutingRoutingThe Advanced/Routing feature provides access to configuration options for

2-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRoutingAdding a New Route1. Select Advanced/ Routing.2. Select New Route.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-43 AdvancedRouting3. Set the following fields:4. Select OK.Field DefinitionName Select a name from

viii Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUITable of ContentsFirewall Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-44 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRoutingEditing a Route1. Select Advanced/ Routing.2. Select a Route listed on the Routing

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-45 AdvancedRoutingDeleting a Route1. Select Advanced/ Routing.2. Select Action/Delete icon, to remo

2-46 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRoutingRIPSelect Advanced/Routing and click on the RIP tab. The RIP window allows you to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-47 AdvancedRoutingOSPFSelect Advanced/Routing and click on the OSPF tab. The OSPF window allows yo

2-48 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRoutingOSPF Field DefinitionsWhen the Open Shortest Past First (OSPF) option is enabled, t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-49 AdvancedRoutingArea Authentication Type None - Set the Area Authentication to none.Simple Authen

2-50 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedRoutingConfiguring OSPFNOTE: For interface OSPF configuration information, see OSPF Confi

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-51 AdvancedRouting10. Enter the Network IP Address of the Neighbor to add to the OSPF Network.11. E

2-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedScheduler RulesScheduler RulesTo create a scheduling rule:1. Select Advanced/Scheduler Rul

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-53 AdvancedScheduler Rules5. Select New Time Segment Entry to define the day(s) of the week to appl

CHAPTER 1Web Based ManagementThis Reference Manual covers the web-based Graphical User Interface (GUI) for the following products: Adit 3000 series (

2-54 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedScheduler Rules7. Select OK for each window until at the Scheduler Rules table.The new rul

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-55 AdvancedSimple Network Management ProtocolSimple Network Management ProtocolSNMP enables network

2-56 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedSimple Network Management Protocol3. Set the Trusted Peer. This is the IP address and subn

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-57 AdvancedSystem SettingsSystem SettingsSelect Advanced/System Settings to view and modify general

2-58 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedSystem SettingsAdit 3500

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-59 AdvancedSystem SettingsAdit MSR

2-60 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedSystem SettingsDefining an Outgoing Mail ServerFeatures that require the Adit to send e-ma

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-61 AdvancedTechnical InformationTechnical InformationSelect Advanced/Technical Information to view

2-62 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUIAdvancedTechnical InformationAdit MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-63 AdvancedTechnical InformationConfiguration FileThe Configuration File button on the Technical In