Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuale Utente Scaricare il pdf (Pagina 248)

100

101

11-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Ethernet Interface Mode

end

Use the end command to exit the current configuration mode, and must be used to mark the end of any

configuration file. This command can be entered in any configuration mode with the same result.

Syntax: (config-int-eth-{n})# end

Example: (config-int-eth-1)# end

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode.

If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you

to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config-int-eth-{n})# exit

Example: (config-int-eth-1)# exit

(config)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

firewall

Use the firewall command to enable the configured firewall. To delete a preference, see no

firewall command on page 11-17.

Syntax: (config-int-eth-{n})# firewall enable

Example: (config-int-eth-1)# firewall enable

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 495 496

Commenti su questo manuale

Nessun commento

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manuale Utente Pagina 248

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca